Gallery
Here are some photos of other things I’ve worked on and created over the years.
Welding Exhaust Hander
Welding up a removable exhaust hanger for my car.
Custom Wood Splitter
Designed and built this tow-behind wood splitter while working at a fabrication shop in my hometown.
Bandaged Up 1960's MuCculloch Chainsaw
Fixed a crack in the gas tank of the 1960's McCulloch chainsaw with some JB Weld and a stainless steel bandage.
LabVIEW Dynomometer GUI
Dynomometer GUI created using LabVIEW
Removable Exhaust Hanger
Made a removable exhaust hanger to replace the rusted out one underneath my car.
DC Motor Dynamometer
Motor carriage (left), bearingless torque/RPM transducer (middle), hysteresis brake (right)
DAQ and Drive Circuits
DAQ and modules (top), DC motor driver circuit (bottom) and hysteresis brake driver circuit (left)
Hoola Hooper
I made this hoola hooper guy for my girlfriend as a birthday present.
A Bench I Made While Backpacking in Vermont
I built this bench to add a little more comfort to our campsite while my friends and I were backpacking in Vermont. #takealoadoff
Basketball Hoop
A basketball hoop as a Christmas present to one of my sisters.
Bass Guitar
This bass guitar I made for my brother as a Christmas present.
Gear Driven Jewelry Box
Made this gear driven jewelry box for my girlfriend one Christmas. When you open the lid, the gear train pushes out the bottom drawer and pulls it in when the lid is closed.
Yamaha Vmax Throttle Extension
A throttle extension device I made for my 2001 Yamaha Vmax 700 to accommodate the handlebar risers
Yamaha Vmax Handlebar Risers
Handlebar risers I made for my Vmax
Yamaha Vmax Handlbar Riser Mount
Handlebar riser mount
Wheel Bearing Puller
A very crude wheel bearing puller I made on the fly while replacing on a '96 Civic
Wall Mounted Wine Rack 3D Model
Wall mounted wine rack designed for my girlfriend's mother. Designed in Autodesk Inventor.
Steampunk Motorcycle 3D Model
3D model of a motorcycle made from standard hardware parts
Mom
A Christmas present I made for my mom
Mix Table 3D Model
Designed this mix table for my brother using Autodesk Inventor
Light bulb Pull Chain 3D Model
3D model of a light bulb pull chain
Wall Mounted Wine Rack
Wine rack made from red oak. This was a Christmas present to my girlfriend's mom.
Ford '32 Coupe Build
The beginning on a Ford '32 coupe build for a customer.
Eclipse Engine Pulling
Pulling the engine on a friend's Eclipse
Eclipse Cam Gears
Setting the timing on an Eclipse
Eclipe Valvetrain
The valvetrain from a friend's Eclipse
Dart Cases
Dart cases I made from my Dad and one of his friends
Toaster Power Switch
Installed a power switch in my toaster oven so I don't have to listen to the stepper motor hum when it's not in use anymore.
